Compressor Overheating Diagnosis & Prevention
HVAC School - For Techs, By Techs
Bryan Orr
4.9 • 1K Ratings
🗓️ 13 May 2021
⏱️ 32 minutes
🧾️ Download transcript
Summary
In this podcast episode, Bryan and Eric Mele discuss the diagnosis and prevention of compressor overheating in HVAC and refrigeration.
The main causes of compressor overheating are inadequate cooling back to the compressor, low charge, restrictions, and sometimes even poor suction line insulation. We want to keep the suction temperature low while maintaining appropriate superheat. If the suction line temperature is too high, the compressor can't cool down well enough. Dirty condenser coils, low voltage, weak capacitors, or an inadequate condenser fan can also lead to compressor overheating.
Electrical problems, including too little capacitance, will make a compressor go out on thermal overload. When you have refrigerant problems, the thermal mass will just keep growing; it takes a long time to heat the compressor up, and it will take a long time to cool it down.
In a thermal overload, a bimetallic disk in the compressor will open and break all three legs of power. When a compressor goes out on thermal overload, it will make an open circuit, and you will read infinite ohms. Knowing that the compressor has gone out on thermal overload is just the beginning of compressor overheating diagnosis.
So, to begin diagnosis, you'll want to make sure there's refrigerant in the system. Inspect the unit visually and note anything that seems odd. Then, you'd check your capacitor for electrical problems. You can also feel the compressor to get an idea of the extent of the overheating (try not to burn yourself). You'll also want to monitor the amp draw, condensing temperature, suction pressure, and superheat.
Eric and Bryan also discuss:
- Axial fans
- Condenser fan intermittent failures
- Resetting the compressor
- Cooling down the compressor
- Setting up your meter
- Being out on high pressure
- Wrapping wire to increase ammeter resolution
- High return gas temperature
Learn more about Refrigeration Technologies HERE.
If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.
Transcript
Click on a timestamp to play from that location
| 0:00.0 | The HVAC School Podcast is made possible by these great partners. |
| 0:08.6 | Refrigeration Technologies is a sponsor and they make a new excellent product called Nylog White. |
| 0:15.0 | Nylog White is used for air, water glyco, thread sealing applications. |
| 0:21.0 | It is an excellent product. It is very smooth. It's made from the very best |
| 0:26.4 | materials in order to seal, but also to be really easy to work with. If you've used other types |
| 0:32.3 | of pipe dope, then you're definitely |
| 0:34.2 | going to want to take a look at Nylog White for all of your water, air, or |
| 0:38.5 | glycol applications. Find out more by going to Refrig, Tech.com. |
| 0:44.4 | Carrier and Carrier.com |
| 0:46.4 | Navac at Navac Global. |
| 0:49.6 | Speed Clean and Speed Clean. |
| 0:51.2 | Speed Clean great folks. |
| 0:52.4 | They make a lot of really excellent purpose built tools for cleaning |
| 0:56.0 | the mini split bib kit is an excellent way to clean |
| 0:59.0 | duckless systems or mini splits |
| 1:01.0 | both the blower wheel and the evaporator coil can be cleaned by placing the bib kit |
| 1:05.0 | securely underneath your high wall air handlers. Find out more go to speed clean.com. He's no gold finger. |
| 1:17.0 | That would be dangerous in high voltage electrical panels. |
| 1:22.0 | It's Brian Orr. |
| 1:24.0 | Hey, oh folks, this is the HVAC school |
| 1:28.0 | podcast. I'm Brian, and this is the podcast that helps you remember some things. |
| 1:31.0 | You might have forgotten along the way, as well as helps you remember some things. You might have forgotten along the way, |
... |
Please login to see the full transcript.
Disclaimer: The podcast and artwork embedded on this page are from Bryan Orr, and are the property of its owner and not affiliated with or endorsed by Tapesearch.
Generated transcripts are the property of Bryan Orr and are distributed freely under the Fair Use doctrine. Transcripts generated by Tapesearch are not guaranteed to be accurate.
Copyright © Tapesearch 2026.

