Locked Compressor Mistakes w/ Bert

HVAC School - For Techs, By Techs

Bryan Orr

Training, Careers, Airconditioning, Self-improvement, Hvac, Business, Education, Refrigeration, Heating, Ac, Apprenticeship

4.8 • 985 Ratings

🗓️ 29 May 2025

⏱️ 32 minutes

🔗️ Recording | iTunes | RSS

🧾️ Download transcript

Summary

In this informative HVAC podcast episode, Bryan and Bert dive deep into the complex world of locked and internal overload compressors, focusing specifically on single-phase residential units. The discussion begins with Bert explaining one of the most common challenges technicians face: diagnosing a locked compressor. He describes how compressors that are locked will typically run for only a second before overheating and stopping, creating a cycle that can be difficult to detect if technicians aren't carefully monitoring at the right moment.

The hosts share personal experiences and practical diagnostic techniques, with Bert recounting how he once simulated a locked compressor by cutting the start winding wire and concealing it beneath other wires and zip ties. This demonstration highlights the importance of thorough inspection, including checking terminal connections. Bryan shares a story from his early career when he mistakenly condemned a compressor with damaged terminals, not knowing about terminal repair kits - a candid moment that illustrates how even experienced technicians continue to learn throughout their careers.

A significant portion of the podcast is dedicated to explaining the electrical fundamentals of compressor operation, including an enlightening discussion about start windings, run windings, and common connections. Bryan passionately clarifies misconceptions about current flow through these different windings, explaining that the start winding actually has consistently lower amperage due to its connection through a capacitor. The hosts also detail the critical differences between a compressor that's overheating versus one that's truly locked, emphasizing that the physical temperature of the compressor often provides the key diagnostic clue.

Key Topics Covered:

· How to identify a locked compressor versus one that's out on internal overload

· The importance of checking terminal connections and wire continuity

· Why compressors that are truly locked don't have time to physically overheat

· Common causes of compressor overheating: condenser fan failure, refrigerant issues, airflow problems

· The proper diagnostic method for catching a locked compressor "in the act"

· The mechanics of start windings versus run windings and their amperage differences

· When and how to use hard start kits appropriately (and why they shouldn't be used universally)

· How to communicate with customers when diagnosing compressor issues

· The role of crankcase heaters in preventing flooded starts

· Terminal repair techniques and when they're appropriate

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 6th Annual HVACR Training Symposium at https://hvacrschool.com/symposium.

Subscribe to our podcast on your iPhone or Android.

Subscribe to our YouTube channel.

Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android

Transcript

Click on a timestamp to play from that location

0:00.0	The HVAC School Podcast is made possible by these brand partners.
0:09.4	Refrigeration technologies and their Viper aerosol coil cleaner for condensers and evaporators.
0:15.8	If you don't know, the Viper aerosol cleaner is a foaming cleaner that you can spray into a coil with its really powerful pin spray.
0:23.7	It has a strong degreasing capability in a convenient package.
0:28.8	It's safe to use with rinsing or no rinse, so there's zero need to bring a bulky pump sprayer into the house for an evaporator coil cleaning or in many refrigeration
0:38.0	applications. And like you mentioned, it works on our evaporators and condensers. Find out more at
0:43.6	refrigetech.com. Field piece in the Cat 85 Combustion Analyzer. Cat 85 measures everything
0:51.2	you need to keep your customer safe, O2, CO, CO2, and draft pressure.
0:56.0	It comes with a built-in monometer, so you have one less tool to carry and can knock out static and gas pressure readings in one fell swoop.
1:05.0	The real interesting thing about the cat 85 is its sensor technology for better accuracy, longevity, and ease of use.
1:11.6	It automatically separates and returns accumulated water to the flu using the patent-pending hydrocycle pump technology.
1:19.6	You know who needs hydrocycle pump technology? Why all of us?
1:22.6	Sensors are field-replaceable, so you don't have to wait on shipping timelines and can just change it right then and there to maximize uptime, as well as patent-pending sensor vault technology, prolonging sensor life.
1:34.7	Sensors also come with a four-year warranty.
1:36.8	As with a lot of other Field Piece tools, you can connect the Cat85 with the JobLink System app to get all your readings in one place,
1:46.6	and there's a 1,000-foot wireless range.
1:50.5	Find out more at FieldPease.com, and be sure to check out the Cat-85 and the other handy combustion analyzers and add-ons.
1:54.8	That's FieldPiece.com.
1:57.4	Navak at Navak Global.com.
2:06.6	The ESCO Institute, with over 200 HVACR training solutions, courses, webinars, and simulators,
2:10.2	find out more by going to escogroup.org.
2:12.9	Carrier and carrier.com.
	...

Please login to see the full transcript.

Previous episode | Next episode

Disclaimer: The podcast and artwork embedded on this page are from Bryan Orr, and are the property of its owner and not affiliated with or endorsed by Tapesearch.

Generated transcripts are the property of Bryan Orr and are distributed freely under the Fair Use doctrine. Transcripts generated by Tapesearch are not guaranteed to be accurate.